Page 1 - E-STeaM_UKv160218

SETeMa

Scientifically Engineered Textile Machines
E-STeaM ES series

The E-STeaM is a modular high volume steam/air fixation unit with
integrated steam generator for the fixation of textile dyes.
With temperatures between 100 and 180°C and dwell times from 2 to 30
minutes, the E-STeaM is suitable for all textile dyes. The E-STeaM allows
ageing with saturated steam conditions, with temperatures in the range
100 - 105°C, is also suitable for high temperature fixation of disperse dyes at
165 - 180°C and can furthermore be used for hot air fixation of pigment
dyes.
The huge forced steam circulation combined with the PLC controlled heating
and cooling capabilities, guarantee that the selected temperature is
achieved throughout the entire steam chamber with an accuracy of a few
tenths of a degree, resulting in an all-over equal and reproducible colour.
Regeneration of steam during the forced circulation ensures a low fresh
steam consumption.
The maintenance-free chains drive all rollers thus a tensionless fabric
transport is guaranteed. In addition to that a fabric bar can be attached to
the chain which greatly simplifies the feed-in handling of cloth into the
• roll-to-roll high volume production E–STeaM.
steamer
• no leaders for feed-in / feed-out The PLC enables the unit to be started at a predetermined time. During
• all types of textile dyes production stops the unit is switched to a standby level thereby decreasing
the used energy automatically. The unit can also be programmed to be left
• low fresh steam consumption running unattended and to switch off after production has finished.
• reproducible and uniform results
• excellent colour yields The E-STeaM series consists of a basic module, the ES-B36, with a content of
• user friendly PLC-control 36 meters and a modular extension unit, the ES-U36. This modularity enables
flexible configuration, e.g. 2 units to create a content of 72 meters. The
• easy to maintain E–STeaM series is also available with a content of 18 meters, the ES–B18,
• free configuration, e.g. 18, 36, 72, which is upgradable to an ES-B36 within the same machine configuration.
108 m content or more
• upgradable with ES-U units The roll infeed and discharge frame units are modular units and can be
selected from roll-to-roll, lorry to lorry, batch winder or a combination of
• available in a 1.85, 2.50 and 3.40 these. The optional ascending batch winder for higher roll capacity is offered
meter width
with an automatic transverse substrate correction and cloth-side detection
• stainless steel 304 and 316
for perfect straight rolls.
options: The E-STeaM series is available in a 1.85, 2.50 and 3.40 meter width and is
made of 304 and 316 stainless steel. All necessary components are
• ascending batch winder
integrated in the E-STeaM.
• transverse substrate correction with
cloth side detection The E-STeaM is marked.
• scroll rollers for e.g. knitwear
• infeed / discharge frame for
working from / to lorry
• water softener
• external steamnet connection
• custom power / frequency